Filter
Ecumaster BLUETOOTH CAN MODULE
BT MODULE   Bluetooth module The Bluetooth module allows to transmit ECUMASTER log data via Bluetooth communication. It makes it possible to trace all important engine parameters in real-time using Android compatible devices. There is also a third party Dashboard application available. For more information see https://www.realdash.net.   Download Files Bluetooth manual Bluetooth-CAN-BUS.pdf       Key features Free application available in Google Play store Serial or CAN version available Logged channels: RPM, MAP, TPS, IAT, AFR, CLT, LAMBDA, BATTERY VOLTAGE, IGNITION ANGLE, INJECTORS PW, SEC. INJECTORS PW, INJECTORS DC, EGT #1 and #2, KNOCK LEVEL, DWELL TIME, CURRENT GEAR, BARO PRESSURE, ANALOG #1,#2,#3,#4, ECU TEMPERATURE, OIL PRESSURE, OIL TEMPERATURE, FUEL PRESSURE, ETHANOL CONTENT, FUEL TEMPERATURE, VEHICLE SPEED, FUEL PRESSURE DELTA,FUEL LEVEL, TABLES SET ,CHECK ENGINE CODE

76,01 €*
Ecumaster Lambda to CAN
LAMBDA to CAN Ecumaster Lambda to CAN controller is a compact device used to control a Bosch LSU 4.9 wideband oxygen sensor and transmit the lambda reading via CAN-BUS. Two programmable 0-5V analog signal lines are available, along with the CAN transmission.The controller uses a dedicated Bosch integrated circuit paired with an automotive grade digital controller to precisely manage the oxygen sensor and calculate Lambda and AFR.Multiple controllers may be used at the same time on one CAN–BUS, lending installation flexibility. Key features •Bosch LSU 4.9 support (ADV version also available)•Operating voltage range: 9 -16V•Current consumption: up to 3A (during warm up)•IP65 enclosure•2 programmable analog outputs 0-5V•Communication and setup: CAN 2.0A/B

210,00 €*
Abgastemperatursensor EGT Set Typ-k
Der Abassensor wird mittels einer Einschweißmuffe befestigt.Das Anschluss Kabel ist 3m lang Lieferumfang: 1x Sensor Typ-k1x Anschlusskabel1x Einschweißmuffe

69,00 €*
Ecumaster CAN keybord 8 buttons
Our range of products also includes CAN-bus based keyboard (available with different key layouts). Designed to withstand the harshest conditions, completely immune to water, mud or fuel. We should also to mention that as compared to a traditional switch panel the wiring is greatly simplified.   Built in LEDs indicate button state (RGB colors) and additionally act as back-light for the keyboard. The behaviour of individual keys is fully configurable using EMU BLACK or PMU client software. The unique idea of a replacement system for individual inserts means it is easy to rearrange the keypad layout using the existing insert without affecting appearance. Moreover, custom inserts can be supplied. Key features CAN bus compatible keyboard, 125kbps, 250kbps, 500kbps CAN bus speed supported, works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards), full customization possible, IP 67 rated

324,00 €*
Ecumaster CAN keybord 4 buttons
Our range of products also includes CAN-bus based keyboard (available with different key layouts). Designed to withstand the harshest conditions, completely immune to water, mud or fuel. We should also to mention that as compared to a traditional switch panel the wiring is greatly simplified.   Built in LEDs indicate button state (RGB colors) and additionally act as back-light for the keyboard. The behaviour of individual keys is fully configurable using EMU BLACK or PMU client software. The unique idea of a replacement system for individual inserts means it is easy to rearrange the keypad layout using the existing insert without affecting appearance. Moreover, custom inserts can be supplied. Key features CAN bus compatible keyboard, 125kbps, 250kbps, 500kbps CAN bus speed supported, works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards), full customization possible, IP 67 rated

221,99 €*
Bosch Sensor, Öltemperatur/-druck BOSCH 0 261 230 340
Sensor, Öltemperatur/-druck BOSCH 0 261 230 340

105,00 €*
Bosch 2 PIN Stecker passend für Bosch Klopfsensor
Neuers Steckergehäuse mit Pins und Dichtungen.Passend für Bosch Breitband Klopfsensoren.

5,00 €*
Steckerset Stecker für BOSCH LSU 4.9 Breitbandlambdasonde
Steckergehäuse mit Pins für Bosch Breitbandsonde LSU 4.9Original Bosch Steckergehäuse.

7,65 €*
Drucksensor Öl/Kraftstoff 7 bar
7 bar Drucksensor Firma WHP (ein renommiertes Unternehmen in den Vereinigten Staaten). Dies sind die perfekten Sensoren für die präzise Messung der Drucköl, Kraftstoff oder Luft in automotive-Anwendungen.   Drucksensoren WHP sind der ideale Begleiter für jedes Steuergerät. Werden gemäss ISO9001 Zertifikat erstellt.Druckmessung ist sehr genau (Genauigkeit 0,5 %). Die Sensoren sind aus Edelstahl 304 CNC gefertigt.     Das Set besteht aus: 1 X Drucksensor WHP sind 7bar, 1 X set Plug-ins von den Terminals, 1 x Gewinde Dichtmittel auf der Loctive-Kleber   Parameter: Spannungsbereich: 0,5-4 .5V Druckbereich: 0-sind 7barBefestigungsgewinde: 1/8 "NPT

105,00 €*
Stecker DQ500 DSG PDK Getriebe Getriebestecker Pins Direktschaltgetriebe
Neuer Stecker für VAG DQ500 DSG und Porsche PDK Getriebe.Steckergehäuse + Pins + Dichtungen.Stecker, Pins und Dichtungen sind vom Erstausrüster.

19,00 €*
Bosch 1 928 404 226 - 2-poliger Stecker
Neuer Bosch 2 poliger Stecker,  1 928 404 226 Steckergehäuse + Pins + Dichtungen.Stecker, Pins und Dichtungen sind vom Erstausrüster.

5,00 €*
Pluskabel Batteriekabel 120cm 1,2m
gebrauchtes Pluskabel Batteriekabel ,120cm lang

60,00 €*
ECUMASTER CAN SWITCH BOARD V3
CAN SWITCH BOARD V3 A CAN switch board is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to this, the device has 4 built-in low side outputs that can be activated with a CAN bus message. The main purpose of this board is to build custom steering wheel panels containing buttons, rotary switches and indicators.   The switchboard device is designed to work with EMU BLACK and PMU. It can also be used with any other devices with custom configurable CAN bus inputs. Key features CAN BUS 2.0B 500 or 1000kbps, user selectable different CAN ID and CAN frame structures can be selected, only 25x25mm in size, 8  switch inputs (switched to ground) 8 analog inputs / rotary switch inputs, 0-5V, 10bits 4 low side outputs (0.5A, resistive and inductive loads) 6-22V power supply +5V output for powering rotary switches, sensors and potentiometers firmware upgrade over the CAN bus

139,00 €*
Ecumaster EGT to CAN module
EGT to CAN The EGT to CAN module collects input signals from 8 EGT probes (K-Type thermocouples), converts the probe voltage into a numerical temperature figure and sends the appropriate data via a CAN bus. The module is fully configurable using USB connection and Microsoft Windows based client software. High quality EGT sensors are available on request. Using ECUMASTER EMU engine management it is possible to trim each cylinder fuel dose based on EGT temperatures readings.   Protect your engineagainst failure This function can be used as a powerful tool in the protection of possible engine and auxiliary engine component failure. With the EGT temperature data that is collected it is possible to trim each cylinder fuel dose in the ECUMASTER ecu.   Product features Up to 8 EGT probes, Cold junction compensation 0-1250C input range CAN 2.0 compatible Configurable CAN bitrate, byte order (Intel, Motorola), message IDs USB port for PC connection Client software for configuration and temperature monitoring

145,00 €*
BOSCH LSU 4.2 Lamdasonde
Breitband Lambda Sonde BOSCH LSU 4.2

111,00 €*
ECUMASTER BATTERY ISOLATOR M8
BATTERY ISOLATOR Ecumaster Battery Isolator is a motorsport master relay devicedesigned for FIAcompliant battery isolation and engine shutdown.The device is designed for harsh motorsport environments and weighsonly 83g. Featuring a full solid-state design, an absence of mechanicalcomponents ensures long life and high reliability.The device has built-in alternator load dump protection without theaddition of any external components.There is no risk of damage to expensive electronic equipment duringemergency shutdown. The isolator is controlled with two externalswitches and can be shut down with a CAN-bus message.The message may be sent from an Ecumaster PMU16 unit in the caseof impact or another event. The device is configurable through CANbus.It also sends diagnostic information which can be used by otherequipment and is valuable during device setup and diagnosis. It is fullyprotected against overheating and over-current.Device status is indicated with a multi-color led light.       Key features •Weight: 83g•Dimensions: 50mm x 100mm x 38.5mm•Voltage range: 6V – 19V, 28V transient(12V automotive installations only)•Operating temperature range: -40C + 125C•Current capability: 300A continuous, peak up to 1000A•Current measurement resolution 4A•Current measurement range: -1000A to 1000A•Current measurement accuracy: ±10%•Inductive load switching capability: 600mJ•Enclosure: Anodized aluminium, IP67 rated• High current terminals: M8 nickel plated terminalsor Radlok connectors•Signal connector: Deutsch ASX202-06PN(mating plug ASX602-06SN included)•Power save state current consumption: <1mA•ON state current consumption: ~20mA•Engine kill output: 3A, High (VBat), Low (GND) or Hi-Z

399,00 €*
Ansauglufttemperatursensor IAT Sensor
Gerätestecker Lufttemperatursensor IAT, hervorragend eignet, um mit ECUMASTER zu arbeiten. Der Sensor verfügt über eine M12x1.5 Gewinde. Bei ECUMASTER EMU als Sensor BOSCH NTC M12-L 0280130039 eingeben

24,99 €*