Filter
LOTUS 2zz Plug&Play-​Adapter inkl. DBW Modul Ecumaster EMU classic
Plug & Play-Adapter mit integriertem Drive By Wire Modul. Passend für LOTUS 2zzan die ECUMASTER EMU classic​Abb. ähnlich Der Adapter wird an den originalen Kabelbaumstecker adaptiert.

279,00 €*
AUDI 1.8T BAM AMK 225 PS Plug&Play-​Adapter mit DBW Modul Ecumaster EMU classic
Plug & Play-Adapter inkl. DBW Modul Passend für VW / AUDI 1.8T BAM / AMK 225 PS an die ECUMASTER EMU classic​Abb. ähnlich Der Adapter wird an den originalen Kabelbaumstecker adaptiert.

249,00 €*
KABELBAUM TRIJEKT BEE
Vorgefertiger Kabelbaum, ca. 2m lang, mit offenen Enden. Folgende Stränge sind darin enthalten: Versorgung (inkl. Kraftstoffpumpe, Drehzahlmesser, Funktions- und Gangwechseleingang)   4 E-Ventile  Drosselklappe Lambdasonde Motortemperatur Lufttemperatur 4 Zündspulen (int. Treiber) 4 Zündausgänge (ext. Treiber) CAN-Bus Luftdruck Drehzahl Totpunkt  Schnittstelle  

300,00 €*
KABELBAUM TRIJEKT PREMIUM "STANDARD" (2 METER)
Vorgefertiger Kabelbaum, ca. 2m lang, mit offenen Enden. Folgende Stränge sind darin enthalten: Versorgung (inkl. Kraftstoffpumpe, Drehzahlmesser, Funktionseingang) 6 E-Ventile  Drosselklappe Lambdasonde (LSU 4.9) Motortemperatur Lufttemperatur 4 Zündausgänge (ext. Treiber) CAN-Bus Luftdruck Luftmasse Leerlaufsteller Ladedruck-Taktventil Drehzahl Totpunkt Schnittstelle

373,00 €*
Mitsubishi EVO 4 5 6 7 8 Plug&Play-​Adapter Ecumaster EMU classic
Plug & Play-Adapter Passend für Mitsubishi EVO 4 5 6 7 8 an die ECUMASTER EMU classic​Abb. ähnlich Der Adapter wird an den originalen Kabelbaumstecker adaptiert.

149,00 €*
BMW m50 - non Vanos (DME 3,1) Plug&Play-​Adapter Ecumaster EMU classic
Plug & Play-Adapter Passend für BMW m50 - non Vanos (DME 3,1) an die ECUMASTER EMU classic​Abb. ähnlich Der Adapter wird an den originalen Kabelbaumstecker adaptiert.

179,00 €*
Ecumaster EMU Classic Kit 1
EMU CLASSIC   We are excited to announce a new and improved version of our popular EMU engine control unit: the EMU Classic. Our goal at ECUMASTER is to provide the best possible products at an affordable price. The new EMU Classic is evidence of our dedication to that goal. We have improved the design of the EMU based on customer feedback and have kept the price at a similar level. The main improvements are as follows: Improved ignition outputs allowing the use of more than one active coil on one output, Separate +5V output regulator for external sensors, Highly protected H-Bridges (stepper outputs), Galvanic separated USB port, Compact CNC machined, black anodized enclosure (147x62x30 mm vs 155x120x45 mm) Both EMU and EMU CLASSIC use the same firmware and software package. EMU Classic is designed to operate the most advanced and complex engines presently available. The EMU CLASSIC controls fueling, ignition and auxiliary systems on 1-12 cylinder engines including those with drive-by-wire throttles1 and VVT.     The adaptable firmware means the most awkward crank trigger patterns can be utilized allowing future proofing for new patterns not yet released. It can drive up to 6 passive or 12 smart coils directly and does not require external amplifier/power modules to achieve this. Sophisticated drive-by-wire strategies provide a wide range of throttle control along with advanced plausibility (fault/error) checking for safety. The EMU features more built-in value than any other aftermarket ECU. It easily matches the functionality of other stand-alone management systems with multiple inputs and outputs. Unlike many other ECU systems, EMU has built in wideband lambda input (Bosch LSU 4.2 sensors wire directly), MAP control connector (4 bar MAP sensor on board), 2 EGT probe inputs and an input for directly connecting a Flex Fuel ethanol content sensor. All of this provides greater flexibility, reduces costs and negates the requirement for external or supplemental signal conditioning control systems and the associated wiring that other management systems require. Map switching, launch control, adaptive Lambda control, flex fuel and wheel slip control are among many of the software controllable options available. Specification GENERAL Enclosure protection  IP 60 Temperature range AECQ100 GRADE3 (-40 to +85C) Reverse battery protection Yes, internal Operating voltage 6-20V, immunity to transients according to ISO 7637 Operating current (ECU) < 0.5A Size (mm) 155x120x45 Weight (g) 500 Connectors 2 x 24 FCI Automotive connector Communication USB (with PC client software), serial or CAN OUTPUTS Injector outputs 6 protected outputs 5A, low side Ignition outputs 6 outputs 7A(15A peak) (passive&active coils supported) Aux outputs 6 protected outputs 5A, low side Stepper outputs Full bridge up to 0.8A, can be used as separate outputs WBO heater Protected low side up to 5A +5V 1 CAN BUS Yes, with additional module Serial Yes INPUTS Analog inputs 7, 10Bits, 0-5V, 4 additional analog inputs with CAN module EGT inputs 2 for K-Type thermocouple Knock sensor 2 Oxygen sensor LSU 4.2 or Narrow band Trigger inputs 3 (primary, 2 cams) Hall / VR software selectable VSS 1 (Hall / VR) Flex Fuel Using CAM#2  or VSS SENSORS Temperature sensors IAT, CLT, Oil temperature (user defined characteristic), AC evap temperature Pressure sensor MAP, Oil pressure, Fuel pressure (user defined characteristic), AC pressure sensor Oxygen sensor LSU 4.2 (built in controller), Narrow band, external WBO controllers Speed Vehicle speed sensor (VR/HALL), Gear sensor (sensor, calculated) FUELING Injectors Up to 6 Hi Z injectors (sequential) Battery compensation User defined, wizard for popular injectors Fueling strategies VE based speed density, Alpha N Air charge temp. Based on IAT and CLT VE table 2 tables 16×20 (Load x RPM), resolution of 0.1% Individual cylinder trim Yes Staged injection Yes Additional correction EGT correction (per cylinder), BARO, TPS vs MAP, TPS vs RPM, Warmup, Nitrous, LC, ALS, ASE, Fuel pressure, Knock sensor Lambda based real time correction Using Lambda/AFR target table Acc. / Deceleration enrichment Yes IGNITION Ignition outputs 6 for passive and active coils (software selectable) Supported triggers N-1, N-2, N-3, N+1, Multitooth, Subaru triggers, Nissan trigger, Lotus Elise, Audi trigger, Renault Clio Wiliams / Alpine, Colt 1.5CZ Ignition angle table 2 tables 16×20 (Load x RPM), resolution of 0.5 Deg Per cylinder trim Yes Dwell time battery compensation Used defined,  wizard for popular coils Odd fire compatibility Application dependent Additional correction CLT, IAT, TPS vs MAP, Nitrous,  Idle, Knock sensor, LC, Pit limiter, ALS, Flat shift, Timers, Acc. enrichment KNOCK SENSING Channels 2 Resonant frequency range 1-20kHz, 3rd order AAF Sampling Ignition event driven, knock window Actions Ignition retard, fuel enrichment, dashboard indication IDLE CONTROL Control type PWM solenoids (2,3 wires), drive by wire, stepper motors (bi and unipolar),  ignition cut, fuel cut Control strategy Open / Close loop , ignition angle control VE correction Yes, for Alpha-N Corrections AC clutch, coolant fan, analog input BOOST CONTROL Boost ref  and target tables 2 sets 16×20 (TPS vs RPM) Control strategies Open / Closed loop (PID based) Corrections Gear, VSS, IAT, EGT DRIVE BY WIRE1 Control strategy Advanced 3D PID + static friction compensation Supported throttles All with DC motor and current requirement lower than 6A Wizard for 28 popular electronic throttles PPS to throttle position characteristic 3D table BLIP support Yes ALS support Yes TRACTION CONTROL TC strategy Delta RPM, gear compensation Torque reduction Spark cut using 3D table (16×20) Sensitivity control 10 position rotary switch VARIABLE VALVE TIMING Supported systems VVTi, MiVec, VANOS, Double Vanos Number of camshafts 2 Control strategy PID based closed loop, CAM angle target tables 12×12 FLEX FUEL Ethanol content measurement Yes Fuel temperature measurement Yes Tables blending VE, IGN, Lambda/AFR, Boost, Cranking fuel, ASE, Warmup Fuel temperature PW correction Yes SPORT ALS 2 independent ALS setting, DBW support Shift light Per gear shift light Launch control Yes Gear cut Yes (Open loop), DBW blip supported Source: Switch, load cell, CAN Pit limiter Yes Rolling anti lag Yes ENGINE PROTECTION Fail safe values for critical sensors Yes Dashboard indication of failures Yes, user defined Over temperature engine protection Yes, user defined, RPM limit Low oil pressure protection Yes, user defined, shut off Fuel pressure protection Yes, fuel dose compensation, RPM limit, engine shut off High exhaust temperature Alarm, per cylinder fuel trim, boost limit CAN BUS2 CAN standard 2.0A 125, 250, 500, 1000 kBps 11, 29 bits Supported CAN Dashes3 ECUMASTER, Motec M800 Set 1, Haltech E8 E11v2, Pectel SQ 6, AEM Supported OEM CAN streams3 BMW E46, Citroen C2, Mazda RX8, Ford ST, Polaris RZR, Mini Cooper R53, Fiat 500, Renault Clio, Lotus, Ford Fiesta, Ford ST OTHER Unused injection outputs can be used as AUX output Yes Unused ignition outputs can be used as AUX output Only for some functions Output functions Fuel pump, coolant fan, parametric outputs, nitrous control, PWM 3D table output,  AC clutch, main relay, speedometer, tachometer Password protection Yes, 2 levels Timers Fuel, Ignition, Boost, timers controlled by virtual outputs Serial dashboard support AIM, RaceTechnology Autotune Yes Built in trigger scope Yes Logging Real time logging to PC computer, logging on external loggers (serial / CAN) 1External module required 2External module required 3Supported channels are application dependent

819,01 €*
Nissan SR20 (64PIN) Plug&Play-​Adapter Ecumaster EMU classic
Plug & Play-Adapter  Passend für Nissan SR20 (64PIN) an die ECUMASTER EMU classic​Abb. ähnlich Der Adapter wird an den originalen Kabelbaumstecker adaptiert.

149,00 €*
AUDI S4 / RS4 B5 2.7 Biturbo Plug&Play-​Adapter mit DBW Modul Ecumaster EMU classic
Plug & Play-Adapter inkl. DBW Modul Passend für AUDI S4 / RS4 B5 2.7 Biturbo an die ECUMASTER EMU classic​Abb. ähnlich Der Adapter wird an den originalen Kabelbaumstecker adaptiert.

249,00 €*
ECUMASTER EMU PRO16
EMU PRO Das EMU PRO ist ein eigenständiges Motorsteuerungssystem, das sich direkt an den professionellen Motorsport richtet. Es verfügt über ein umfassendes Funktionsspektrum und bietet umfangreiche Abstimmungsmöglichkeiten. Das System ermöglicht eine präzise Steuerung des Antriebsstrangs in Kombination mit höchster Flexibilität, um die Motorkalibrierungen an die anspruchsvollsten Projekte anpassen zu können. Das EMU PRO wird in zwei Versionen angeboten: Das EMU PRO 16 ist für Anwendungen mit einer großen Anzahl von Ein- und Ausgängen ausgelegt, während das EMU PRO 8 für kleinere Motoren (bis zu 8 Zylinder) geeignet ist. HAUPTMERKMALE Das fortschrittliche Kraftstoffmodell des EMU PRO umfasst Closed-Loop-Short- und Long-Term-Trim-Algorithmen in Verbindung mit einem Kraftstofffilmmodell und bietet eine außergewöhnliche Genauigkeit bei der Steuerung von Einspritzdüsen. Die Software ist darauf ausgelegt, dem Benutzer eine beispiellose Flexibilität bei der Konfiguration von Strategien zu bieten. Der Benutzer kann die Größe aller Tabellen in der Software und die Kanäle, die auf jeder Tabellenachse verwendet werden, anpassen. Die Bin-Werte auf der X- und Y-Achse können ebenfalls geändert werden, was die Genauigkeit der Tabellenablesungen in nichtlinearen Teilen des beschriebenen Modells erhöht. Das EMU PRO ist ein flexibles System mit benutzerdefinierten Funktionen, Zahlen, CAN-Eingängen und -Exporten, die bereits vom Power Management Unit (PMU) und dem Advanced Display Unit (ADU) bekannt sind. Stand-alone sequentielles Getriebe-/Paddle-Shift-Advanced-Strategie mit bis zu 4 Closed-Loop-Stufen, PWM-Solenoid-Steuerung. Eine Vielzahl von Ein- und Ausgängen deckt die meisten anspruchsvollen Anwendungen ab. Motorunterstützung - Vier-Takt-, Zweitakt-, Kreiskolbenmotoren; bis zu 12 Zylinder. Sauerstoffsensoren - 2 x interne LSU 4.9-Controller, Unterstützung von bis zu 4 Sensoren. 2 x DBW-Vollunterstützung mit automatischer Kalibrierung. Benutzerdefinierte Tabellengrößen bis zu 32 x 32. Bis zu 4 VVT-Unterstützung, automatische Kalibrierung. 2 x CAN 2.0A/B, 1 x LIN-Bus. 2 x Klopfensoren. Aufzeichnung auf externe USB-Speicher. Datenlogging mit bis zu 500 Hz. 8 [4] x EGT-Eingänge (oder hochpräzise Analogeingänge). Insgesamt 46 [31] Ausgänge und 30 [24] Eingänge. Benutzerdefinierte Benutzerfunktionen, Zahlen, Tabellen und Ausgänge. Wasserdichte IP65-Gehäuse, maßgeschneidertes CNC-gefrästes Aluminium. On-line-Parameteranalyse wird im Graphenprotokoll angezeigt.   Die Funktionen der 8-Version sind in eckigen Klammern aufgeführt.

2.099,00 €*
Ecumaster EMU BLACK Kit 1
EMU BLACK The EMU Black is a class-leading, stand-alone engine management system, designed to operate the most advanced and complex engines available. It is a successor of our proven system, EMU. Throughout EMU’s lifetime we collected lots of data that allows us to substantially improve the device hardware and software. EMU Black targets race cars, road cars, motorcycles, boats, and stationary engine applications. The EMU Black controls fueling, ignition and auxiliary systems on 1-12 cylinder engines including those with drive-by-wire throttles and VVT. It can drive up to 6 passive or 12 smart coils directly and does not require external amplifier/power modules to achieve this. Sophisticated drive-by-wire strategies provide a wide range of throttle control along with advanced plausibility (fault/error) checking for safety. Free, easy to install firmware upgrades further improve system capabilities (e.g. new strategies, trigger patterns, CAN data streams). The EMU Black features more built-in value than any other aftermarket ECU. It easily matches the functionality of other stand-alone management systems with multiple inputs and outputs. Unlike many other ECU systems, the EMU Black has built-in wideband lambda input (Bosch LSU 4.2, and LSU 4.9 sensors wire directly in), MAP control connector (4 bar MAP sensor on board), 2 EGT probe inputs and an input to directly connect a Flex Fuel ethanol content sensor. All of this provides greater flexibility, reduces costs and negates the requirement for external or supplemental signal conditioning control systems and the associated wiring that other management systems require. TECHNOLOGY The EMU Black is assembled according to IPC-S-815A standards to ensure high reliability of the product. The device is manufactured on an automated assembly line with optical inspection, automatically tested including burn-in. The PCB board quality and design, special surface coating and IP60 enclosure keeps the device operational in the harshest environments. The components used allow continued operation in a very wide temperature range (AECQ-100 GRADE 2 (-40 to +105˚C). SPECIFICATION   GENERAL Temperature range AECQ100 GRADE2 (-40 to +105˚C) Reverse battery protection Yes, internal Operating voltage 6-22V, immunity to transients according to ISO 7637 Enclosure IP 60, custom CNC machined aluminium Size (mm) and weight(g) 150x72x31, 390 Connectors 1 x 24, 1 x 39 FCI Automotive connector PC communication USB (with PC client software), serial, CAN OUTPUTS Injector outputs 6 protected outputs 5A, low side Ignition outputs 6 outputs 7A(15A peak) (passive & active coils supported) Aux outputs 6 protected outputs 5A, low side Other outputs Full bridge up to 7A, can be used as separate outputs or 2 H-Bridges WBO heater Protected low side up to 5A Communication Serial, CAN BUS 2.0B INPUTS Analog inputs 9 inputs, resolution 10Bits, 0-5V (protected) EGT inputs 2 for K-Type thermocouple Knock sensor 2 inputs Oxygen sensor LSU 4.2, LSU 4.9 or Narrow band Trigger inputs 3 (primary, 2 cams) Hall/ VR software selectable VSS 1 (Hall / VR) Flex Fuel Sensor Yes Switch inputs 3 inputs, switched to ground SENSORS Temperature sensors IAT, CLT, Oil temperature, AC evap temperature Pressure sensor MAP, Oil pressure, Fuel pressure (user defined characteristic), AC pressure sensor, Back pressure Oxygen sensor LSU 4.2 or 4.9 (built in controller), Narrow band, external WBO controllers Speed Vehicle speed sensor (VR/HALL), Gear sensor (sensor, calculated) FUELING Injectors Up to 8 HiZ injectors (sequential) Injection angle control 0-720 deg, start or end of injections Battery compensation User defined, wizard for popular injectors Fueling strategies VE based speed density, Alpha N Air charge temp. Based on IAT and CLT VE table 2 tables 16×20 (Load x RPM), resolution of 0.1% Individual cylinder trim Yes Staged injection Yes Additional correction Oxygen sensor corrections, EGT correction (per cylinder), BARO, TPS vs MAP, TPS vs RPM, Warmup, Nitrous, LC, ALS, ASE, Fuel pressure, Knock sensor Lambda based real time correction Using Lambda target table Acc. / Deceleration enrichment Yes IGNITION Ignition outputs 6 for passive and active coils (software selectable) Supported triggers N-1, N-2, N-3, N+1, Multitooth, Subaru triggers, Nissan trigger, Lotus Elise, Audi trigger, Renault Clio Wiliams / Alpine, Colt 1.5CZ, Wrangler Ignition angle table 2 tables 16×20 (Load x RPM), resolution of 0.5 Deg Per cylinder trim Yes Dwell time battery compensation Used defined,  wizard for popular coils Odd fire compatibility Application dependent Additional correction CLT, IAT, TPS vs MAP, Nitrous,  Idle, Knock sensor, LC, Pit limiter, ALS, Flat shift, Timers, Acc. enrichment KNOCK SENSING Channels 2 Resonant frequency range 1-20kHz, 3rd order AAF Sampling Ignition event driven, knock window Actions Ignition retard, fuel enrichment, dashboard indication IDLE CONTROL Control type PWM solenoids (2,3 wires), drive by wire, stepper motors (bi and unipolar),  ignition cut, fuel cut Control strategy Open / Close loop , ignition angle control VE correction Yes, for Alpha-N Corrections AC clutch, coolant fan, analog input BOOST CONTROL Boost ref  and target tables 2 sets 10×10 (TPS vs RPM) Control strategies Open / Closed loop (PID based) Corrections Gear, VSS, IAT, EGT DRIVE BY WIRE Control strategy Advanced 3D PID + static friction compensation Supported throttles All with DC motor and current requirement lower than 6.5A   Wizard for 28 popular electronic throttles PPS to throttle position characteristic 3D table BLIP support Yes ALS support Yes TRACTION CONTROL TC strategy Delta RPM, gear compensation Torque reduction Spark cut using 3D table (16×20) Sensitivity control 10 position rotary switch VARIABLE VALVE TIMING Supported systems VVTi, MiVec, VANOS, Double Vanos Number of camshafts 2 Control strategy PID based closed loop, CAM angle target tables 12×12 FLEX FUEL Ethanol content measurement Yes Fuel temperature measurement Yes Tables blending VE, IGN, Lambda/AFR, Boost, Cranking fuel, ASE, Warmup Fuel temperature PW correction Yes SPORT ALS 2 independent ALS setting, DBW support Shift light Per gear shift light Launch control Yes Gear cut Yes (Open loop), DBW blip supported   Source: Switch, load cell, CAN Pit limiter Yes Rolling anti lag Yes ENGINE PROTECTION Fail safe values for critical sensors Yes Dashboard indication of failures Yes, user defined Over temperature engine protection Yes (oil and coolant), user defined, RPM limit Low oil pressure protection Yes, user defined, shut off Fuel pressure protection Yes, fuel dose compensation, RPM limit, engine shut off High exhaust temperature Alarm, per cylinder fuel trim, boost limit CAN BUS CAN standard 2.0B 125, 250, 500, 1000 kbps Supported CAN Dashes ECUMASTER, Motec M800 Set 1, Haltech E8 E11v2, Pectel SQ 6, AEM Supported OEM CAN streams BMW E46, Citroen C2, Mazda RX8, Ford ST, Polaris RZR, Mini Cooper R53, Fiat 500, Renault Clio, Lotus, Ford Fiesta, Ford ST, EVO X (AYC support) OTHER Unused injection outputs can be used as AUX output Yes Output functions Fuel pump, coolant fan, parametric outputs, nitrous control, PWM 3D table output,  AC clutch, main relay, speedometer, tachometer Password protection Yes, 2 levels Timers Fuel, Ignition, Boost, timers controlled by virtual outputs Serial dashboard support AIM, RaceTechnology Autotune Yes Built in trigger scope Yes Logging Real time logging to PC computer, logging on external loggers (serial / CAN)

1.119,00 €*
TRIJEKT BEE ZÜND- UND EINSPRITZSTEUERUNG VOLLVERSION
TECHNISCHE DATEN EINGÄNGE   Drehzahlerfassung über Induktiv- oder Hallsensor OT-Erfassung über Induktiv- oder Hallsensor Lambdasonde  Drosselklappenpotentiometer Luftdrucksensor Motortemperatursensor Lufttemperatursensor digitaler Funktionseingang Luftmassenmesser Gangwechsel (alternativ) Abgastemperatur (alternativ) Geschwindigkeitseingang (alternativ) interner Luftdrucksensor SCHNITTSTELLEN serielle Schnittstelle RS232 CAN-Bus GRÖSSE (LXBXH ca. 110 x 80 x 35mm AUSGÄNGE 4x Einspritzventil 4x Zündausgang (für externe Treiber) 4x integrierter Zündtreiber Kraftstoffpumpenrelais Drehzahlmesser unbenutzte Ausgänge können als frei programmierbare Takt- und Schaltausgänge verwendet werden (z.B. auch als Ladedrucktaktventil oder Leerlaufsteller) DATENLOGGER 4MB interner Datenspeicher GEHÄUSE hochwertiges spritzwassergeschütztes Aluminiumgehäuse 34-poliger Stecker       SOFTWARE & FUNKTIONEN   vielfältiger Anschluss von Serienkomponenten halb- und vollsequenzielle, kennfeldgesteuerte Zündung und Einspritzung programmierbarer Fehlerspeicher programmierbare Sonderfunktionen programmierbare Schaltausgänge verschiedene Drehzahlaufnahmesysteme Lambdaregelung Selbstlernfunktionalitäten Luftmassenerfassung wahlweise über: alpha/n Saugrohrdruck Luftmassenmesser Ladedruckregelung Leerlaufsteller Launch control

1.400,00 €*
GOLF 4 IV R32 Plug&Play-​Adapter inkl. DBW Modul Ecumaster EMU classic
Plug & Play-Adapter mit integriertem Drive By Wire Modul. Passend für GOLF IV 4 R32an die ECUMASTER EMU classic​Abb. ähnlich Der Adapter wird an den originalen Kabelbaumstecker adaptiert.

349,00 €*
Ecumaster EMU Classic
EMU CLASSIC   We are excited to announce a new and improved version of our popular EMU engine control unit: the EMU Classic. Our goal at ECUMASTER is to provide the best possible products at an affordable price. The new EMU Classic is evidence of our dedication to that goal. We have improved the design of the EMU based on customer feedback and have kept the price at a similar level. The main improvements are as follows: Improved ignition outputs allowing the use of more than one active coil on one output, Separate +5V output regulator for external sensors, Highly protected H-Bridges (stepper outputs), Galvanic separated USB port, Compact CNC machined, black anodized enclosure (147x62x30 mm vs 155x120x45 mm) Both EMU and EMU CLASSIC use the same firmware and software package. EMU Classic is designed to operate the most advanced and complex engines presently available. The EMU CLASSIC controls fueling, ignition and auxiliary systems on 1-12 cylinder engines including those with drive-by-wire throttles1 and VVT.     The adaptable firmware means the most awkward crank trigger patterns can be utilized allowing future proofing for new patterns not yet released. It can drive up to 6 passive or 12 smart coils directly and does not require external amplifier/power modules to achieve this. Sophisticated drive-by-wire strategies provide a wide range of throttle control along with advanced plausibility (fault/error) checking for safety. The EMU features more built-in value than any other aftermarket ECU. It easily matches the functionality of other stand-alone management systems with multiple inputs and outputs. Unlike many other ECU systems, EMU has built in wideband lambda input (Bosch LSU 4.2 sensors wire directly), MAP control connector (4 bar MAP sensor on board), 2 EGT probe inputs and an input for directly connecting a Flex Fuel ethanol content sensor. All of this provides greater flexibility, reduces costs and negates the requirement for external or supplemental signal conditioning control systems and the associated wiring that other management systems require. Map switching, launch control, adaptive Lambda control, flex fuel and wheel slip control are among many of the software controllable options available. Specification GENERAL Enclosure protection  IP 60 Temperature range AECQ100 GRADE3 (-40 to +85C) Reverse battery protection Yes, internal Operating voltage 6-20V, immunity to transients according to ISO 7637 Operating current (ECU) < 0.5A Size (mm) 155x120x45 Weight (g) 500 Connectors 2 x 24 FCI Automotive connector Communication USB (with PC client software), serial or CAN OUTPUTS Injector outputs 6 protected outputs 5A, low side Ignition outputs 6 outputs 7A(15A peak) (passive&active coils supported) Aux outputs 6 protected outputs 5A, low side Stepper outputs Full bridge up to 0.8A, can be used as separate outputs WBO heater Protected low side up to 5A +5V 1 CAN BUS Yes, with additional module Serial Yes INPUTS Analog inputs 7, 10Bits, 0-5V, 4 additional analog inputs with CAN module EGT inputs 2 for K-Type thermocouple Knock sensor 2 Oxygen sensor LSU 4.2 or Narrow band Trigger inputs 3 (primary, 2 cams) Hall / VR software selectable VSS 1 (Hall / VR) Flex Fuel Using CAM#2  or VSS SENSORS Temperature sensors IAT, CLT, Oil temperature (user defined characteristic), AC evap temperature Pressure sensor MAP, Oil pressure, Fuel pressure (user defined characteristic), AC pressure sensor Oxygen sensor LSU 4.2 (built in controller), Narrow band, external WBO controllers Speed Vehicle speed sensor (VR/HALL), Gear sensor (sensor, calculated) FUELING Injectors Up to 6 Hi Z injectors (sequential) Battery compensation User defined, wizard for popular injectors Fueling strategies VE based speed density, Alpha N Air charge temp. Based on IAT and CLT VE table 2 tables 16×20 (Load x RPM), resolution of 0.1% Individual cylinder trim Yes Staged injection Yes Additional correction EGT correction (per cylinder), BARO, TPS vs MAP, TPS vs RPM, Warmup, Nitrous, LC, ALS, ASE, Fuel pressure, Knock sensor Lambda based real time correction Using Lambda/AFR target table Acc. / Deceleration enrichment Yes IGNITION Ignition outputs 6 for passive and active coils (software selectable) Supported triggers N-1, N-2, N-3, N+1, Multitooth, Subaru triggers, Nissan trigger, Lotus Elise, Audi trigger, Renault Clio Wiliams / Alpine, Colt 1.5CZ Ignition angle table 2 tables 16×20 (Load x RPM), resolution of 0.5 Deg Per cylinder trim Yes Dwell time battery compensation Used defined,  wizard for popular coils Odd fire compatibility Application dependent Additional correction CLT, IAT, TPS vs MAP, Nitrous,  Idle, Knock sensor, LC, Pit limiter, ALS, Flat shift, Timers, Acc. enrichment KNOCK SENSING Channels 2 Resonant frequency range 1-20kHz, 3rd order AAF Sampling Ignition event driven, knock window Actions Ignition retard, fuel enrichment, dashboard indication IDLE CONTROL Control type PWM solenoids (2,3 wires), drive by wire, stepper motors (bi and unipolar),  ignition cut, fuel cut Control strategy Open / Close loop , ignition angle control VE correction Yes, for Alpha-N Corrections AC clutch, coolant fan, analog input BOOST CONTROL Boost ref  and target tables 2 sets 16×20 (TPS vs RPM) Control strategies Open / Closed loop (PID based) Corrections Gear, VSS, IAT, EGT DRIVE BY WIRE1 Control strategy Advanced 3D PID + static friction compensation Supported throttles All with DC motor and current requirement lower than 6A Wizard for 28 popular electronic throttles PPS to throttle position characteristic 3D table BLIP support Yes ALS support Yes TRACTION CONTROL TC strategy Delta RPM, gear compensation Torque reduction Spark cut using 3D table (16×20) Sensitivity control 10 position rotary switch VARIABLE VALVE TIMING Supported systems VVTi, MiVec, VANOS, Double Vanos Number of camshafts 2 Control strategy PID based closed loop, CAM angle target tables 12×12 FLEX FUEL Ethanol content measurement Yes Fuel temperature measurement Yes Tables blending VE, IGN, Lambda/AFR, Boost, Cranking fuel, ASE, Warmup Fuel temperature PW correction Yes SPORT ALS 2 independent ALS setting, DBW support Shift light Per gear shift light Launch control Yes Gear cut Yes (Open loop), DBW blip supported Source: Switch, load cell, CAN Pit limiter Yes Rolling anti lag Yes ENGINE PROTECTION Fail safe values for critical sensors Yes Dashboard indication of failures Yes, user defined Over temperature engine protection Yes, user defined, RPM limit Low oil pressure protection Yes, user defined, shut off Fuel pressure protection Yes, fuel dose compensation, RPM limit, engine shut off High exhaust temperature Alarm, per cylinder fuel trim, boost limit CAN BUS2 CAN standard 2.0A 125, 250, 500, 1000 kBps 11, 29 bits Supported CAN Dashes3 ECUMASTER, Motec M800 Set 1, Haltech E8 E11v2, Pectel SQ 6, AEM Supported OEM CAN streams3 BMW E46, Citroen C2, Mazda RX8, Ford ST, Polaris RZR, Mini Cooper R53, Fiat 500, Renault Clio, Lotus, Ford Fiesta, Ford ST OTHER Unused injection outputs can be used as AUX output Yes Unused ignition outputs can be used as AUX output Only for some functions Output functions Fuel pump, coolant fan, parametric outputs, nitrous control, PWM 3D table output,  AC clutch, main relay, speedometer, tachometer Password protection Yes, 2 levels Timers Fuel, Ignition, Boost, timers controlled by virtual outputs Serial dashboard support AIM, RaceTechnology Autotune Yes Built in trigger scope Yes Logging Real time logging to PC computer, logging on external loggers (serial / CAN) 1External module required 2External module required 3Supported channels are application dependent

769,00 €*
3sgte Gen 3 (e.g. St205, mr2 rev3) Plug&Play-​Adapter Ecumaster EMU classic
Plug & Play-Adapter  Passend für 3sgte Gen 3 (e.g. St205, mr2 rev3) an die ECUMASTER EMU classic​Abb. ähnlich Der Adapter wird an den originalen Kabelbaumstecker adaptiert.

149,00 €*
AUDI 1.8T BAM 225 PS Plug&Play-​Adapter Ecumaster EMU BLACK
Plug & Play-Adapter für die Einbindung an die ECUMASTER EMU BlackDer Adapter wird an den originalen Kabelbaumstecker adaptiert.

249,00 €*
AUDI S3 TT LEON 1.8T AMK 209PS Plug&Play-​Adapter Ecumaster EMU BLACK
Plug & Play-Adapter für die Einbindung an die ECUMASTER EMU BlackDer Adapter wird an den originalen Kabelbaumstecker adaptiert.

249,00 €*
Ecumaster EMU BLACK Kit 2
EMU BLACK The EMU Black is a class-leading, stand-alone engine management system, designed to operate the most advanced and complex engines available. It is a successor of our proven system, EMU. Throughout EMU’s lifetime we collected lots of data that allows us to substantially improve the device hardware and software. EMU Black targets race cars, road cars, motorcycles, boats, and stationary engine applications. The EMU Black controls fueling, ignition and auxiliary systems on 1-12 cylinder engines including those with drive-by-wire throttles and VVT. It can drive up to 6 passive or 12 smart coils directly and does not require external amplifier/power modules to achieve this. Sophisticated drive-by-wire strategies provide a wide range of throttle control along with advanced plausibility (fault/error) checking for safety. Free, easy to install firmware upgrades further improve system capabilities (e.g. new strategies, trigger patterns, CAN data streams). The EMU Black features more built-in value than any other aftermarket ECU. It easily matches the functionality of other stand-alone management systems with multiple inputs and outputs. Unlike many other ECU systems, the EMU Black has built-in wideband lambda input (Bosch LSU 4.2, and LSU 4.9 sensors wire directly in), MAP control connector (4 bar MAP sensor on board), 2 EGT probe inputs and an input to directly connect a Flex Fuel ethanol content sensor. All of this provides greater flexibility, reduces costs and negates the requirement for external or supplemental signal conditioning control systems and the associated wiring that other management systems require. TECHNOLOGY The EMU Black is assembled according to IPC-S-815A standards to ensure high reliability of the product. The device is manufactured on an automated assembly line with optical inspection, automatically tested including burn-in. The PCB board quality and design, special surface coating and IP60 enclosure keeps the device operational in the harshest environments. The components used allow continued operation in a very wide temperature range (AECQ-100 GRADE 2 (-40 to +105˚C). SPECIFICATION   GENERAL Temperature range AECQ100 GRADE2 (-40 to +105˚C) Reverse battery protection Yes, internal Operating voltage 6-22V, immunity to transients according to ISO 7637 Enclosure IP 60, custom CNC machined aluminium Size (mm) and weight(g) 150x72x31, 390 Connectors 1 x 24, 1 x 39 FCI Automotive connector PC communication USB (with PC client software), serial, CAN OUTPUTS Injector outputs 6 protected outputs 5A, low side Ignition outputs 6 outputs 7A(15A peak) (passive & active coils supported) Aux outputs 6 protected outputs 5A, low side Other outputs Full bridge up to 7A, can be used as separate outputs or 2 H-Bridges WBO heater Protected low side up to 5A Communication Serial, CAN BUS 2.0B INPUTS Analog inputs 9 inputs, resolution 10Bits, 0-5V (protected) EGT inputs 2 for K-Type thermocouple Knock sensor 2 inputs Oxygen sensor LSU 4.2, LSU 4.9 or Narrow band Trigger inputs 3 (primary, 2 cams) Hall/ VR software selectable VSS 1 (Hall / VR) Flex Fuel Sensor Yes Switch inputs 3 inputs, switched to ground SENSORS Temperature sensors IAT, CLT, Oil temperature, AC evap temperature Pressure sensor MAP, Oil pressure, Fuel pressure (user defined characteristic), AC pressure sensor, Back pressure Oxygen sensor LSU 4.2 or 4.9 (built in controller), Narrow band, external WBO controllers Speed Vehicle speed sensor (VR/HALL), Gear sensor (sensor, calculated) FUELING Injectors Up to 8 HiZ injectors (sequential) Injection angle control 0-720 deg, start or end of injections Battery compensation User defined, wizard for popular injectors Fueling strategies VE based speed density, Alpha N Air charge temp. Based on IAT and CLT VE table 2 tables 16×20 (Load x RPM), resolution of 0.1% Individual cylinder trim Yes Staged injection Yes Additional correction Oxygen sensor corrections, EGT correction (per cylinder), BARO, TPS vs MAP, TPS vs RPM, Warmup, Nitrous, LC, ALS, ASE, Fuel pressure, Knock sensor Lambda based real time correction Using Lambda target table Acc. / Deceleration enrichment Yes IGNITION Ignition outputs 6 for passive and active coils (software selectable) Supported triggers N-1, N-2, N-3, N+1, Multitooth, Subaru triggers, Nissan trigger, Lotus Elise, Audi trigger, Renault Clio Wiliams / Alpine, Colt 1.5CZ, Wrangler Ignition angle table 2 tables 16×20 (Load x RPM), resolution of 0.5 Deg Per cylinder trim Yes Dwell time battery compensation Used defined,  wizard for popular coils Odd fire compatibility Application dependent Additional correction CLT, IAT, TPS vs MAP, Nitrous,  Idle, Knock sensor, LC, Pit limiter, ALS, Flat shift, Timers, Acc. enrichment KNOCK SENSING Channels 2 Resonant frequency range 1-20kHz, 3rd order AAF Sampling Ignition event driven, knock window Actions Ignition retard, fuel enrichment, dashboard indication IDLE CONTROL Control type PWM solenoids (2,3 wires), drive by wire, stepper motors (bi and unipolar),  ignition cut, fuel cut Control strategy Open / Close loop , ignition angle control VE correction Yes, for Alpha-N Corrections AC clutch, coolant fan, analog input BOOST CONTROL Boost ref  and target tables 2 sets 10×10 (TPS vs RPM) Control strategies Open / Closed loop (PID based) Corrections Gear, VSS, IAT, EGT DRIVE BY WIRE Control strategy Advanced 3D PID + static friction compensation Supported throttles All with DC motor and current requirement lower than 6.5A   Wizard for 28 popular electronic throttles PPS to throttle position characteristic 3D table BLIP support Yes ALS support Yes TRACTION CONTROL TC strategy Delta RPM, gear compensation Torque reduction Spark cut using 3D table (16×20) Sensitivity control 10 position rotary switch VARIABLE VALVE TIMING Supported systems VVTi, MiVec, VANOS, Double Vanos Number of camshafts 2 Control strategy PID based closed loop, CAM angle target tables 12×12 FLEX FUEL Ethanol content measurement Yes Fuel temperature measurement Yes Tables blending VE, IGN, Lambda/AFR, Boost, Cranking fuel, ASE, Warmup Fuel temperature PW correction Yes SPORT ALS 2 independent ALS setting, DBW support Shift light Per gear shift light Launch control Yes Gear cut Yes (Open loop), DBW blip supported   Source: Switch, load cell, CAN Pit limiter Yes Rolling anti lag Yes ENGINE PROTECTION Fail safe values for critical sensors Yes Dashboard indication of failures Yes, user defined Over temperature engine protection Yes (oil and coolant), user defined, RPM limit Low oil pressure protection Yes, user defined, shut off Fuel pressure protection Yes, fuel dose compensation, RPM limit, engine shut off High exhaust temperature Alarm, per cylinder fuel trim, boost limit CAN BUS CAN standard 2.0B 125, 250, 500, 1000 kbps Supported CAN Dashes ECUMASTER, Motec M800 Set 1, Haltech E8 E11v2, Pectel SQ 6, AEM Supported OEM CAN streams BMW E46, Citroen C2, Mazda RX8, Ford ST, Polaris RZR, Mini Cooper R53, Fiat 500, Renault Clio, Lotus, Ford Fiesta, Ford ST, EVO X (AYC support) OTHER Unused injection outputs can be used as AUX output Yes Output functions Fuel pump, coolant fan, parametric outputs, nitrous control, PWM 3D table output,  AC clutch, main relay, speedometer, tachometer Password protection Yes, 2 levels Timers Fuel, Ignition, Boost, timers controlled by virtual outputs Serial dashboard support AIM, RaceTechnology Autotune Yes Built in trigger scope Yes Logging Real time logging to PC computer, logging on external loggers (serial / CAN)

1.065,00 €*
AUDI 2.2 ( 3b, AAN) Plug&Play-​Adapter Ecumaster EMU classic
Plug & Play-Adapter Passend für AUDI 2.2 ( 3b, AAN) an die ECUMASTER EMU classic​Abb. ähnlich Der Adapter wird an den originalen Kabelbaumstecker adaptiert.

249,00 €*
KABELBAUM TRIJEKT PREMIUM "ERWEITERT" (3 METER)
Vorgefertiger Kabelbaum, ca. 3m lang, mit offenen Enden.  Folgende Stränge sind darin enthalten: Versorgung (inkl. Kraftstoffpumpe, Drehzahlmesser, Funktionseingang) 8 E-Ventile  Drosselklappe 2 Breitband-Lambdasonden (LSU 4.9) Motortemperatur Lufttemperatur 8 Zündausgänge (ext. Treiber) CAN-Bus Luftdruck Luftmasse Leerlaufsteller Ladedruck-Taktventil Drehzahl Totpunkt Schnittstelle

482,00 €*
Ecumaster EMU Classic Kit 3
EMU CLASSIC   We are excited to announce a new and improved version of our popular EMU engine control unit: the EMU Classic. Our goal at ECUMASTER is to provide the best possible products at an affordable price. The new EMU Classic is evidence of our dedication to that goal. We have improved the design of the EMU based on customer feedback and have kept the price at a similar level. The main improvements are as follows: Improved ignition outputs allowing the use of more than one active coil on one output, Separate +5V output regulator for external sensors, Highly protected H-Bridges (stepper outputs), Galvanic separated USB port, Compact CNC machined, black anodized enclosure (147x62x30 mm vs 155x120x45 mm) Both EMU and EMU CLASSIC use the same firmware and software package. EMU Classic is designed to operate the most advanced and complex engines presently available. The EMU CLASSIC controls fueling, ignition and auxiliary systems on 1-12 cylinder engines including those with drive-by-wire throttles1 and VVT.     The adaptable firmware means the most awkward crank trigger patterns can be utilized allowing future proofing for new patterns not yet released. It can drive up to 6 passive or 12 smart coils directly and does not require external amplifier/power modules to achieve this. Sophisticated drive-by-wire strategies provide a wide range of throttle control along with advanced plausibility (fault/error) checking for safety. The EMU features more built-in value than any other aftermarket ECU. It easily matches the functionality of other stand-alone management systems with multiple inputs and outputs. Unlike many other ECU systems, EMU has built in wideband lambda input (Bosch LSU 4.2 sensors wire directly), MAP control connector (4 bar MAP sensor on board), 2 EGT probe inputs and an input for directly connecting a Flex Fuel ethanol content sensor. All of this provides greater flexibility, reduces costs and negates the requirement for external or supplemental signal conditioning control systems and the associated wiring that other management systems require. Map switching, launch control, adaptive Lambda control, flex fuel and wheel slip control are among many of the software controllable options available. Specification GENERAL Enclosure protection  IP 60 Temperature range AECQ100 GRADE3 (-40 to +85C) Reverse battery protection Yes, internal Operating voltage 6-20V, immunity to transients according to ISO 7637 Operating current (ECU) < 0.5A Size (mm) 155x120x45 Weight (g) 500 Connectors 2 x 24 FCI Automotive connector Communication USB (with PC client software), serial or CAN OUTPUTS Injector outputs 6 protected outputs 5A, low side Ignition outputs 6 outputs 7A(15A peak) (passive&active coils supported) Aux outputs 6 protected outputs 5A, low side Stepper outputs Full bridge up to 0.8A, can be used as separate outputs WBO heater Protected low side up to 5A +5V 1 CAN BUS Yes, with additional module Serial Yes INPUTS Analog inputs 7, 10Bits, 0-5V, 4 additional analog inputs with CAN module EGT inputs 2 for K-Type thermocouple Knock sensor 2 Oxygen sensor LSU 4.2 or Narrow band Trigger inputs 3 (primary, 2 cams) Hall / VR software selectable VSS 1 (Hall / VR) Flex Fuel Using CAM#2  or VSS SENSORS Temperature sensors IAT, CLT, Oil temperature (user defined characteristic), AC evap temperature Pressure sensor MAP, Oil pressure, Fuel pressure (user defined characteristic), AC pressure sensor Oxygen sensor LSU 4.2 (built in controller), Narrow band, external WBO controllers Speed Vehicle speed sensor (VR/HALL), Gear sensor (sensor, calculated) FUELING Injectors Up to 6 Hi Z injectors (sequential) Battery compensation User defined, wizard for popular injectors Fueling strategies VE based speed density, Alpha N Air charge temp. Based on IAT and CLT VE table 2 tables 16×20 (Load x RPM), resolution of 0.1% Individual cylinder trim Yes Staged injection Yes Additional correction EGT correction (per cylinder), BARO, TPS vs MAP, TPS vs RPM, Warmup, Nitrous, LC, ALS, ASE, Fuel pressure, Knock sensor Lambda based real time correction Using Lambda/AFR target table Acc. / Deceleration enrichment Yes IGNITION Ignition outputs 6 for passive and active coils (software selectable) Supported triggers N-1, N-2, N-3, N+1, Multitooth, Subaru triggers, Nissan trigger, Lotus Elise, Audi trigger, Renault Clio Wiliams / Alpine, Colt 1.5CZ Ignition angle table 2 tables 16×20 (Load x RPM), resolution of 0.5 Deg Per cylinder trim Yes Dwell time battery compensation Used defined,  wizard for popular coils Odd fire compatibility Application dependent Additional correction CLT, IAT, TPS vs MAP, Nitrous,  Idle, Knock sensor, LC, Pit limiter, ALS, Flat shift, Timers, Acc. enrichment KNOCK SENSING Channels 2 Resonant frequency range 1-20kHz, 3rd order AAF Sampling Ignition event driven, knock window Actions Ignition retard, fuel enrichment, dashboard indication IDLE CONTROL Control type PWM solenoids (2,3 wires), drive by wire, stepper motors (bi and unipolar),  ignition cut, fuel cut Control strategy Open / Close loop , ignition angle control VE correction Yes, for Alpha-N Corrections AC clutch, coolant fan, analog input BOOST CONTROL Boost ref  and target tables 2 sets 16×20 (TPS vs RPM) Control strategies Open / Closed loop (PID based) Corrections Gear, VSS, IAT, EGT DRIVE BY WIRE1 Control strategy Advanced 3D PID + static friction compensation Supported throttles All with DC motor and current requirement lower than 6A Wizard for 28 popular electronic throttles PPS to throttle position characteristic 3D table BLIP support Yes ALS support Yes TRACTION CONTROL TC strategy Delta RPM, gear compensation Torque reduction Spark cut using 3D table (16×20) Sensitivity control 10 position rotary switch VARIABLE VALVE TIMING Supported systems VVTi, MiVec, VANOS, Double Vanos Number of camshafts 2 Control strategy PID based closed loop, CAM angle target tables 12×12 FLEX FUEL Ethanol content measurement Yes Fuel temperature measurement Yes Tables blending VE, IGN, Lambda/AFR, Boost, Cranking fuel, ASE, Warmup Fuel temperature PW correction Yes SPORT ALS 2 independent ALS setting, DBW support Shift light Per gear shift light Launch control Yes Gear cut Yes (Open loop), DBW blip supported Source: Switch, load cell, CAN Pit limiter Yes Rolling anti lag Yes ENGINE PROTECTION Fail safe values for critical sensors Yes Dashboard indication of failures Yes, user defined Over temperature engine protection Yes, user defined, RPM limit Low oil pressure protection Yes, user defined, shut off Fuel pressure protection Yes, fuel dose compensation, RPM limit, engine shut off High exhaust temperature Alarm, per cylinder fuel trim, boost limit CAN BUS2 CAN standard 2.0A 125, 250, 500, 1000 kBps 11, 29 bits Supported CAN Dashes3 ECUMASTER, Motec M800 Set 1, Haltech E8 E11v2, Pectel SQ 6, AEM Supported OEM CAN streams3 BMW E46, Citroen C2, Mazda RX8, Ford ST, Polaris RZR, Mini Cooper R53, Fiat 500, Renault Clio, Lotus, Ford Fiesta, Ford ST OTHER Unused injection outputs can be used as AUX output Yes Unused ignition outputs can be used as AUX output Only for some functions Output functions Fuel pump, coolant fan, parametric outputs, nitrous control, PWM 3D table output,  AC clutch, main relay, speedometer, tachometer Password protection Yes, 2 levels Timers Fuel, Ignition, Boost, timers controlled by virtual outputs Serial dashboard support AIM, RaceTechnology Autotune Yes Built in trigger scope Yes Logging Real time logging to PC computer, logging on external loggers (serial / CAN) 1External module required 2External module required 3Supported channels are application dependent

929,00 €*
MOTORSTEUERGERÄT TRIJEKT PREMIUM INKL. 2. LAMBDACONTROLLER
TRIJEKT PREMIUM – FÜR ALLE EVENTUALITÄTEN GERÜSTET.DIE E-GAS-STEUERUNG UND ZWEI BREITBAND-LAMBDACONTROLLER SIND BEREITS INTEGRIERT.ZAHLREICHE EIN- UND AUSGÄNGE ERMÖGLICHEN EINE FLEXIBLE NUTZUNG VON ZUSÄTZLICHEN FUNKTIONEN. BESONDERHEIT   trijekt premium ist nahezu 100% Pinkompatibel zu ME7 Steuergeräten, wie sie in vielen VAG-Fahrzeugen eingesetzt werden (1,8T, R32, W8, RS4, RS6). Dadurch lässt sich mit nur wenigen Handgriffen eine "plug and play" Lösung an Ihrem serienmäßigen Fahrzeugkabelbaum realisieren. EINGÄNGE Drehzahlerfassung über Induktiv- oder Hallsensor OT-Erfassung über Induktiv- oder Hallsensor Lambdasonde 2x Drosselklappen-Potentiometer Luftmassenmesser Luftdrucksensor Motortemperatursensor Lufttemperatursensor interner Luftdrucksensor 2x LSU4.9 Breitbandlambdasonde 6x digitaler Funktionseingang 4x Abgastemperatur 4x Rad-Drehzahl Unbenutzte Eingänge können für weitere Sensoren verwendet werden(Gangwechseleingang, Öldruck, Öltemp.) SCHNITTSTELLEN serielle Schnittstelle RS232 CAN-Bus GRÖSSE (LXBXH ca. 180 x 110 x 40 mm AUSGÄNGE 8x Einspritzventil 8x Zündausgang (für externe Zündtreiber) Kraftstoffpumpenrelais Leerlaufsteller Ladedruckregelventil Drehzahlmesser 10x programmierbarer Ausgang E-Gas-Drosselklappe unbenutzte Ausgänge können als frei programmierbare Schaltausgänge verwendet werden(Motor-Check-Lampe, Kühlerlüfter, Shiftlight, el. Wasserpumpe, Abgasklappe, Saugrohrumschaltung, …) DATENLOGGER interner Datenspeicher GEHÄUSE hochwertiges spritzwassergeschütztes Aluminiumgehäuse 2-teiliger 121-poliger Stecker

1.552,00 €*
AUDI RS4 B5 2,7 Bi-​Turbo - Plug&Play-​Adapter für Ecumaster EMU BLACK
1 Plug & Play-Adapter für die Einbindung an die ECUMASTER EMU BlackDer Adapter wird an den originalen Kabelbaumstecker adaptiert.

249,00 €*
GOLF IV R32 Plug&Play-​Adapter Ecumaster EMU BLACK
Plug & Play-Adapter für die Einbindung an die ECUMASTER EMU BlackDer Adapter wird an den originalen Kabelbaumstecker adaptiert.

299,00 €*